Description
TCMT Highway Pegs Fit For Harley Softail – Features & Prices in Saudi Arabia :
TCMT Highway Pegs Fit For Harley Softail Sportster Electra Road Glide Road King Street Glide with 1.25″ Engine Guard 1 1/4 Highway Bar
Color
Black
Brand
TCMT
Material
Metal, Rubber
Vehicle Service Type
Motorcycle
Fit Type
Fits for Harley models with 1 1/4″ (32mm) Engine Guard
Orientation
Rear
Manufacturer
TCMT
Manufacturer Part Number
US-XF210334-B-A0289
Test video – TCMT Highway Pegs Fit For Harley Softail :
Product highlights :
Questions & Answers – TCMT Highway Pegs Fit For Harley Softail :
Technical specifications – TCMT Highway Pegs Fit For Harley Softail :
Color
Black
Brand
TCMT
Material
Metal, Rubber
Vehicle Service Type
Motorcycle
Fit Type
Fits for Harley models with 1 1/4″ (32mm) Engine Guard
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
S. C (verified owner) –
good – just the job
A. K (verified owner) –
Nice pegs, but you need longer bolts. – I purchased these for my Road Glide. The pegs themselves look really nice. Seem to be well made. But the bolts supplied to mount the brackets to the crash bars are to short. Way too short. They give you a M13 1.75 that’s about 7/8 of an inch long. At best you might get three threads engaged at full tightness. I purchase two M13 1.75 bolts that were 1 1/2” inches long instead. This worked perfect. I don’t understand how they think the bolts provided would work? Even off the bike when fully tightened you only get three threads engaged. That’s not enough and not safe. With the new bolts I have eight to nine threads engaged. Other than these ridiculously short bolts, they are nice pegs and have plenty of adjustment. I would buy again.
F. L (verified owner) –
Great for the price. – I was reluctant to purchase these pegs. Looking at J and P cycles and paying 200 for pegs seemed ridiculous. Not to mention Harley prices. So, I purchased these. I am neither a mechanic nor fixer upper, however, it took me about 45 minutes to put these pegs on my bike. Some ratings indicated the pegs wouldn’t tighten enough to keep them from slipping on the guards. Not true. Enclosed was plastic to hold them in place. Additionally, they are universal and will fit any bike with 1 1/4-inch bar. Great price, fit. Buy them.
K. G (verified owner) –
Friction tape tweak the ticket! – Bought these for my 2020 HD Street Glide FLHX. They match the original driver foot pads, and passenger pegs exactly. As others have stated you can not tighten them enough to prevent movement however as others have also stated if you do one wrap of friction tape around the engine gaurd where you install them it stops the movement. The manufacturer should add a bit of it with the item and they would have more satisfied customers. They should also add instructions. Because at first attempting to figure out the mounting it is a bit confusing. Overall with the slight tweak of adding friction tape. You would never know that these were not stock.
K. C (verified owner) –
Awesome – These pegs are very heavy duty. I was impressed with the quality of there perfecr fit and finish. They were AWESOME for my first Highway run of 1,000 mile trip. I would recommend these to anyone.
K. C (verified owner) –
Frustrated – I ordered “Style I”, in black. While the product itself is good looking and sturdy, the main mount bolt is too short. It came with a 1 in 1/2×13 stainless bolt with washer for the mounting clamp. If you utilize the washer the bolt is to shot to catch even one thread. After removing the washer I was able to catch a couple threads on one of them, get it tightened up and mounted. The second one however only grabbed one or two treads then stripped out.
K. C (verified owner) –
Frustrated – I ordered “Style I”, in black. While the product itself is good looking and sturdy, the main mount bolt is too short. It came with a 1 in 1/2×13 stainless bolt with washer for the mounting clamp. If you utilize the washer the bolt is to shot to catch even one thread. After removing the washer I was able to catch a couple threads on one of them, get it tightened up and mounted. The second one however only grabbed one or two treads then stripped out.
S. C (verified owner) –
good – just the job
J. S (verified owner) –
Does not fit 1.25″ bars – As others have pointed out these do NOT tightly clamp down on 1.25″ bars. Mine are made from standard 1.25″ DOM tube and like others I had to use some fabric electrical tape wrapped around the bar to get these to stay put. Even then I had to put a pipe on the wrench and really crank it down to get it tight enough to not move. I like the look and feel of these pegs and the powder coating seems good but only time will tell how long they will last.
K. G (verified owner) –
Friction tape tweak the ticket! – Bought these for my 2020 HD Street Glide FLHX. They match the original driver foot pads, and passenger pegs exactly. As others have stated you can not tighten them enough to prevent movement however as others have also stated if you do one wrap of friction tape around the engine gaurd where you install them it stops the movement. The manufacturer should add a bit of it with the item and they would have more satisfied customers. They should also add instructions. Because at first attempting to figure out the mounting it is a bit confusing. Overall with the slight tweak of adding friction tape. You would never know that these were not stock.
K. C (verified owner) –
Awesome – These pegs are very heavy duty. I was impressed with the quality of there perfecr fit and finish. They were AWESOME for my first Highway run of 1,000 mile trip. I would recommend these to anyone.
J. S (verified owner) –
Does not fit 1.25″ bars – As others have pointed out these do NOT tightly clamp down on 1.25″ bars. Mine are made from standard 1.25″ DOM tube and like others I had to use some fabric electrical tape wrapped around the bar to get these to stay put. Even then I had to put a pipe on the wrench and really crank it down to get it tight enough to not move. I like the look and feel of these pegs and the powder coating seems good but only time will tell how long they will last.
F. L (verified owner) –
Great for the price. – I was reluctant to purchase these pegs. Looking at J and P cycles and paying 200 for pegs seemed ridiculous. Not to mention Harley prices. So, I purchased these. I am neither a mechanic nor fixer upper, however, it took me about 45 minutes to put these pegs on my bike. Some ratings indicated the pegs wouldn’t tighten enough to keep them from slipping on the guards. Not true. Enclosed was plastic to hold them in place. Additionally, they are universal and will fit any bike with 1 1/4-inch bar. Great price, fit. Buy them.
A. K (verified owner) –
Nice pegs, but you need longer bolts. – I purchased these for my Road Glide. The pegs themselves look really nice. Seem to be well made. But the bolts supplied to mount the brackets to the crash bars are to short. Way too short. They give you a M13 1.75 that’s about 7/8 of an inch long. At best you might get three threads engaged at full tightness. I purchase two M13 1.75 bolts that were 1 1/2” inches long instead. This worked perfect. I don’t understand how they think the bolts provided would work? Even off the bike when fully tightened you only get three threads engaged. That’s not enough and not safe. With the new bolts I have eight to nine threads engaged. Other than these ridiculously short bolts, they are nice pegs and have plenty of adjustment. I would buy again.