Description
SAE Battery Connector – iGreely 10 Gauge – Features & Prices in Saudi Arabia :
SAE Battery Connector – iGreely 10 Gauge Wire SAE to O Ring Terminal, 2-Pin Quick Disconnect SAE Battery Cable Extension Wire for Solar Panel Automotive Marine Motorcycle Cars RV 10 AWG 2ft/60cm
Test video – SAE Battery Connector – iGreely 10 Gauge :
Product highlights :
Questions & Answers – SAE Battery Connector – iGreely 10 Gauge :
Technical specifications – SAE Battery Connector – iGreely 10 Gauge :
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
S. K (verified owner) –
Terminal leads come off easily – Worked ok out door. Connected to regulated power supply. Moving it found out black terminal came out easily. Trying to figure out how to fix as I do have replacement black shield to put back on
A. J (verified owner) –
It works – I attached this to my LiFePo4 battery on my Aliner for a quick-connect to the solar panels. Aliner comes with a Zamp-style (SAE) outlet already installed but the wire gauge is so thin that the charge controller wouldn’t push any amperage through. It was much easier to install this dongle directly to the battery rather than pull new wiring to the outlet.
A. R (verified owner) –
Well built, perfect for my need – Installs easily. I used it to permanently mount to my battery array under the hood of my jeep. When I need to recharge I need only to deploy my solar panels, plug them into the regulator and plug the regulator into these already under the hood. No tools, screws, nuts needed or dropped in the grass.
A. R (verified owner) –
Well built, perfect for my need – Installs easily. I used it to permanently mount to my battery array under the hood of my jeep. When I need to recharge I need only to deploy my solar panels, plug them into the regulator and plug the regulator into these already under the hood. No tools, screws, nuts needed or dropped in the grass.
D. S (verified owner) –
DELIVERED PROMPTLY – WORKS GREAT KEEPING BATTERY UP AS WE SPEAK. SIMPLE AND EASY INSTALL
A. J (verified owner) –
It works – I attached this to my LiFePo4 battery on my Aliner for a quick-connect to the solar panels. Aliner comes with a Zamp-style (SAE) outlet already installed but the wire gauge is so thin that the charge controller wouldn’t push any amperage through. It was much easier to install this dongle directly to the battery rather than pull new wiring to the outlet.
A. O (verified owner) –
Good quality but reversed polarity from standard – The quality seems great, the fuse holders and wires are very large and solid, which is expected with 10awg.
R. L (verified owner) –
I use it on a solar battery setup. Easy to disconnect if needed. – I use 10 g wire , use it on solar setup.
B. C (verified owner) –
Perfect – The battery in my new truck is unreasonably difficult to access for charging. This makes it much, much easier and less time consuming to maintain the battery. Good product. Time will tell how it holds up.
R. L (verified owner) –
I use it on a solar battery setup. Easy to disconnect if needed. – I use 10 g wire , use it on solar setup.
A. O (verified owner) –
Good quality but reversed polarity from standard – The quality seems great, the fuse holders and wires are very large and solid, which is expected with 10awg.
R. A (verified owner) –
High Quality – I replaced this piece on the battery end for a battery tender. The terminals were too big for my application, but it wasn’t intended for a snowmobile battery, so I crimped on the right size ones. My riding partner did the same thing. At 10ga, it’s enough to jump start each other if needed.
R. A (verified owner) –
High Quality – I replaced this piece on the battery end for a battery tender. The terminals were too big for my application, but it wasn’t intended for a snowmobile battery, so I crimped on the right size ones. My riding partner did the same thing. At 10ga, it’s enough to jump start each other if needed.
B. C (verified owner) –
Perfect – The battery in my new truck is unreasonably difficult to access for charging. This makes it much, much easier and less time consuming to maintain the battery. Good product. Time will tell how it holds up.
S. K (verified owner) –
Terminal leads come off easily – Worked ok out door. Connected to regulated power supply. Moving it found out black terminal came out easily. Trying to figure out how to fix as I do have replacement black shield to put back on
D. S (verified owner) –
DELIVERED PROMPTLY – WORKS GREAT KEEPING BATTERY UP AS WE SPEAK. SIMPLE AND EASY INSTALL