NTHREEAUTO LED Brake Tail Light Rear Turn – Features & Prices in Saudi Arabia :
NTHREEAUTO LED Brake Tail Light Rear Turn Signal Taillights DOT Approved Motorcycle Running License Plate Stop Lights Compatible with Harley Dyna Sportster Road King Electra Glide Fat Boy Softail
Brand
NTHREEAUTO
Light Source Type
LED
Color Temperature
6000 Kelvin
Color
Red, Yellow, Black
Voltage
12 Volts
Fit Type
Vehicle Specific
Position
Rear
Operating Life
30000 Hours
Manufacturer
NTHREEAUTO
Item Weight
13.9 ounces
Package Dimensions
6.34 x 5.43 x 3.43 inches
Manufacturer Part Number
FBAN3MP24891
Special Features
Waterproof
Test video – NTHREEAUTO LED Brake Tail Light Rear Turn :
Product highlights :
【Compatibility】The taillights compatible with Harley Sportster, Street Bob, Dyna, Road King, Softail, Electra Glide, 1999-2019 XL (except XL883N, XL1200CX, XL1200N, XL1200X and 11-19 XL1200C), 99-17 FXDL, 18-19 FXLR, FLHC and FLHCS, 03-later FXST, FXSTB, 00-17 FLST, FLSTC, FLSTF. 09-19 FLHRC, FLHTC, FLHTCU, FLHTK and FLTRU and 99-08 Touring models (except FLHX, 05 FLHTCSE, 07-08 FLHRSE and models equipped with Licenses Plate Relocation Kit P/N 53702-04). Does not fit models with Bobtail fenders.
【DOT Compliant】Legal for use on all roads and highways in the US, and “DOT” is printed on the tail light cover, can be used with confidence. This brake tail light adopts lay down style and claw design, not only upgrade the appearance of your motorcycle, the red claw also makes it easier for you to attract attention and ensure your safety while driving.
【All in One Function】The LED taillight design with brake light + turn signals + DRL running light / license plate lights. When turning on the brake light, flash 3 times and then stabilizes, which has a quite obvious warning effect, increase visibility, stands out on the road.
【Easy Installation】Black – Negative; Red – Running light / License plate light; Purple – Brake light; Yellow – Right turn signals; Blue – Left turn signals. No modification required. Soft rubber is attached to the outer edge of the taillight, water sealed, moisture-proof, waterproof, making the brake light perfectly attached to your motorcycle.
【Brighter and Durable】High quality ABS waterproof plastic material, anti-scratch. Built in 26pcs LED chips, lower power consumption, prolong the lifespan of taillight (Up to 30000 hours lifespan). 6000k for running light, brighter than stock one. Maximize your visibility. And you are backed by 6-Month warranty since the order purchase date.
➕ What is the price of NTHREEAUTO LED Brake Tail Light Rear Turn in Saudi Arabia ?
The price of NTHREEAUTO LED Brake Tail Light Rear Turn in-store is SAR VAT.
➕ When NTHREEAUTO LED Brake Tail Light Rear Turn was released ?
The release date was .
➕ What is the price of NTHREEAUTO LED Brake Tail Light Rear Turn cheap used ?
The price of NTHREEAUTO LED Brake Tail Light Rear Turn used is SAR VAT.
➕ What are the main characteristics of NTHREEAUTO LED Brake Tail Light Rear Turn ?
Special specifications :
【Compatibility】The taillights compatible with Harley Sportster, Street Bob, Dyna, Road King, Softail, Electra Glide, 1999-2019 XL (except XL883N, XL1200CX, XL1200N, XL1200X and 11-19 XL1200C), 99-17 FXDL, 18-19 FXLR, FLHC and FLHCS, 03-later FXST, FXSTB, 00-17 FLST, FLSTC, FLSTF. 09-19 FLHRC, FLHTC, FLHTCU, FLHTK and FLTRU and 99-08 Touring models (except FLHX, 05 FLHTCSE, 07-08 FLHRSE and models equipped with Licenses Plate Relocation Kit P/N 53702-04). Does not fit models with Bobtail fenders.
➕ Is it interesting to buy this product ?
The best people who can answer you are customers who have already bought and tested this product (See Customer Reviews). This product is rated 4.3 / 5 on Amazon.
➕ Where to buy NTHREEAUTO LED Brake Tail Light Rear Turn in Saudi Arabia ?
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
Proof of purchase :
Does the shop give you an invoice ?
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
16 reviews for NTHREEAUTO LED Brake Tail Light Rear Turn
Rated 5 out of 5
M. T (verified owner)–
Fit good works good –
Rated 5 out of 5
L. F (verified owner)–
Perfect what I wanted and needed – Awesome easy exactly what they sead i did some modifications to fit older model
Rated 4 out of 5
M. L (verified owner)–
nicely made, super bright but not quite cut/molded perfectly – The light is really bright and fantastic, the plastic is clear and looks great, the connector was well made and snapped right into the factory harness.
Rated 5 out of 5
L. R (verified owner)–
Item Exactly as described – speedy delivery – Used on Harley Conversion – works great
Rated 5 out of 5
G. L (verified owner)–
brighter than stock – the back housing needs to be recessed more but I got it to work its is more brighter than stock especially the brake light.. very pleased for the price point hopefully longevity is good but it’s been 2 weeks of riding to work and no condensation build up
Rated 5 out of 5
L. F (verified owner)–
Perfect what I wanted and needed – Awesome easy exactly what they sead i did some modifications to fit older model
Rated 5 out of 5
M. T (verified owner)–
Fit good works good –
Rated 4 out of 5
T. I (verified owner)–
Good but not perfect – Good light for the money however it’s not perfect. The seal is too thick and my light did not seal completely but it’s close enough for me to keep on the bike.
Rated 5 out of 5
G. L (verified owner)–
brighter than stock – the back housing needs to be recessed more but I got it to work its is more brighter than stock especially the brake light.. very pleased for the price point hopefully longevity is good but it’s been 2 weeks of riding to work and no condensation build up
Rated 5 out of 5
K. S (verified owner)–
Better than I thought – I like it and it is better than I thought that it would be. The seal seemed a little bit oversized and a little bit of a pain but it should work very well. The only issue I had was that one of the pins on the connector kept releasing and therefore would not make contact. I ended up just cutting the connector off and splicing my factory connector onto it so that it was still a plug and play light. The price is right and it functions pretty good.
Rated 3 out of 5
P. M (verified owner)–
Nice but has issues – Straight with no turn signals it strobes for a few seconds all bright red then stays solid red. Upon connecting turn leads. The sides turn amber with center one staying red, releasing brake they all turn red. Turning right or left it goes back to amber. You loose the strobe effect if you wire up the turn signals, and you loose 2 markers from staying red upon brakeing
Rated 4 out of 5
T. I (verified owner)–
Good but not perfect – Good light for the money however it’s not perfect. The seal is too thick and my light did not seal completely but it’s close enough for me to keep on the bike.
Rated 5 out of 5
K. S (verified owner)–
Better than I thought – I like it and it is better than I thought that it would be. The seal seemed a little bit oversized and a little bit of a pain but it should work very well. The only issue I had was that one of the pins on the connector kept releasing and therefore would not make contact. I ended up just cutting the connector off and splicing my factory connector onto it so that it was still a plug and play light. The price is right and it functions pretty good.
Rated 4 out of 5
M. L (verified owner)–
nicely made, super bright but not quite cut/molded perfectly – The light is really bright and fantastic, the plastic is clear and looks great, the connector was well made and snapped right into the factory harness.
Rated 5 out of 5
L. R (verified owner)–
Item Exactly as described – speedy delivery – Used on Harley Conversion – works great
Rated 3 out of 5
P. M (verified owner)–
Nice but has issues – Straight with no turn signals it strobes for a few seconds all bright red then stays solid red. Upon connecting turn leads. The sides turn amber with center one staying red, releasing brake they all turn red. Turning right or left it goes back to amber. You loose the strobe effect if you wire up the turn signals, and you loose 2 markers from staying red upon brakeing
M. T (verified owner) –
Fit good works good –
L. F (verified owner) –
Perfect what I wanted and needed – Awesome easy exactly what they sead i did some modifications to fit older model
M. L (verified owner) –
nicely made, super bright but not quite cut/molded perfectly – The light is really bright and fantastic, the plastic is clear and looks great, the connector was well made and snapped right into the factory harness.
L. R (verified owner) –
Item Exactly as described – speedy delivery – Used on Harley Conversion – works great
G. L (verified owner) –
brighter than stock – the back housing needs to be recessed more but I got it to work its is more brighter than stock especially the brake light.. very pleased for the price point hopefully longevity is good but it’s been 2 weeks of riding to work and no condensation build up
L. F (verified owner) –
Perfect what I wanted and needed – Awesome easy exactly what they sead i did some modifications to fit older model
M. T (verified owner) –
Fit good works good –
T. I (verified owner) –
Good but not perfect – Good light for the money however it’s not perfect. The seal is too thick and my light did not seal completely but it’s close enough for me to keep on the bike.
G. L (verified owner) –
brighter than stock – the back housing needs to be recessed more but I got it to work its is more brighter than stock especially the brake light.. very pleased for the price point hopefully longevity is good but it’s been 2 weeks of riding to work and no condensation build up
K. S (verified owner) –
Better than I thought – I like it and it is better than I thought that it would be. The seal seemed a little bit oversized and a little bit of a pain but it should work very well. The only issue I had was that one of the pins on the connector kept releasing and therefore would not make contact. I ended up just cutting the connector off and splicing my factory connector onto it so that it was still a plug and play light. The price is right and it functions pretty good.
P. M (verified owner) –
Nice but has issues – Straight with no turn signals it strobes for a few seconds all bright red then stays solid red. Upon connecting turn leads. The sides turn amber with center one staying red, releasing brake they all turn red. Turning right or left it goes back to amber. You loose the strobe effect if you wire up the turn signals, and you loose 2 markers from staying red upon brakeing
T. I (verified owner) –
Good but not perfect – Good light for the money however it’s not perfect. The seal is too thick and my light did not seal completely but it’s close enough for me to keep on the bike.
K. S (verified owner) –
Better than I thought – I like it and it is better than I thought that it would be. The seal seemed a little bit oversized and a little bit of a pain but it should work very well. The only issue I had was that one of the pins on the connector kept releasing and therefore would not make contact. I ended up just cutting the connector off and splicing my factory connector onto it so that it was still a plug and play light. The price is right and it functions pretty good.
M. L (verified owner) –
nicely made, super bright but not quite cut/molded perfectly – The light is really bright and fantastic, the plastic is clear and looks great, the connector was well made and snapped right into the factory harness.
L. R (verified owner) –
Item Exactly as described – speedy delivery – Used on Harley Conversion – works great
P. M (verified owner) –
Nice but has issues – Straight with no turn signals it strobes for a few seconds all bright red then stays solid red. Upon connecting turn leads. The sides turn amber with center one staying red, releasing brake they all turn red. Turning right or left it goes back to amber. You loose the strobe effect if you wire up the turn signals, and you loose 2 markers from staying red upon brakeing