Description
KATUR Motorcycle 8 LED Stop Chopped Fender – Features & Prices in Saudi Arabia :
KATUR Motorcycle 8 LED Stop Chopped Fender Edge Running Brake Rear Tail Light Compatible with Harley Sportster XL 883N 1200N XL1200V XL1200X Red Light
Manufacturer
KATUR
Brand
KATUR
Item Weight
5.6 ounces
Product Dimensions
6.93 x 4.17 x 1.81 inches
Item model number
AMMP-820-Red Shell
Is Discontinued By Manufacturer
No
Exterior
Hard and Durable ABS Housing and PC Lens
Manufacturer Part Number
AMMP-820-Red Shell
OEM Part Number
Compatible with Davidson 2004-2014 Sportster 883, Sportster 1200; 2014 Iron 883;2010-2014 Forty Eight; 2013-2014 Seventy Two
Position
Rear
Bulb Type
LED
Special Features
Bright High Power LED Provides Maximum Visibility and Safety; Waterproof and Rust Free.
Voltage
12 Volts
Test video – KATUR Motorcycle 8 LED Stop Chopped Fender :
Product highlights :
Questions & Answers – KATUR Motorcycle 8 LED Stop Chopped Fender :
Technical specifications – KATUR Motorcycle 8 LED Stop Chopped Fender :
Brand
KATUR
Color
Red
Light Source Type
LED
Special Feature
Bright High Power LED Provides Maximum Visibility and Safety; Waterproof and Rust Free.
Voltage
12 Volts
Position
Rear
Lens Color
Red
Lens Material
Abs
Item Dimensions LxWxH
6.93 x 4.17 x 1.81 inches
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
G. J (verified owner) –
Skip – Very cheap, but you get what you pay for. Not bright. Very flimsy plastic. Skip this one my man.
I. J (verified owner) –
Iron owners beware – Fits and works great on my 2018 Iron 883. Bought the led wiring harness (70683-08) for $10 from Harley and used with the included electrical clip. Followed current tail light wiring and utilized existing under fender wire clips for running wires from rear fender to seat area. Electrical hookup attached right up with no splicing etc needed at all. Rear tire clearance with light is close though. LED provides additional visibility to my rear tail at night for safety. At total price for light ($10 harness) and light itself ($15) around $25, great cost savings versus comparable Harley kit at $100.
N. M (verified owner) –
Easy to wire – Plenty bright enough. Looks good. However wont fit underneath sportster rear fender without modification. Like 1 inch to long.
I. J (verified owner) –
Iron owners beware – Fits and works great on my 2018 Iron 883. Bought the led wiring harness (70683-08) for $10 from Harley and used with the included electrical clip. Followed current tail light wiring and utilized existing under fender wire clips for running wires from rear fender to seat area. Electrical hookup attached right up with no splicing etc needed at all. Rear tire clearance with light is close though. LED provides additional visibility to my rear tail at night for safety. At total price for light ($10 harness) and light itself ($15) around $25, great cost savings versus comparable Harley kit at $100.
B. I (verified owner) –
Not to bad!! – Brake light was packaged very well, as I was reading some of the reviews a lot said that there were wires that were pulled from inside of light. I did not have this problem also, there was no need to J-B Weld or epoxy hold the wires hat were coming out as a stopper was in the package as well that went inside of the hole to keep water from going inside light. Very good light for the value! The only Con that I can see is that when you apply brakes the light does not get much brighter than it already is as a running light. All-in-all it was deff worth the money!!
G. S (verified owner) –
Get heavy duty double sided tape – Light works pretty good. I set it up as an extra brake light not a running light. It isn’t super bright but it is an extra, not my main light. Don’t use that double sided tape it comes with, just get the most heavy duty double sided tape you can get and it will hold fine. Has for me for the past month or so.
T. I (verified owner) –
Not enough clearance for some – Was really solid for like one week lol but if you live in California some of these freeways will make that light be gone in less than a week. The clearance just isn’t enough for my stock for Harley 48 the tire ate that light quick
A. S (verified owner) –
For my sportster 1200 CC 2000 – It fit on the bike just as an FYI you guys should add a little tape or something on the cables , since this bikes vibrates a lot and the weather etc etc .. Its just like a heads-up but It was easy to Install and looks amazing on the bike
T. M (verified owner) –
Fair if you modify a bit. – When I got it it was for a project bike. I figured for the price if I needed to modify it and it didn’t work out no big deal. Arrived on time, packaged well. One of the 3 wires was pulled from the inside. I decided to move forward with the mod anyway. I used it for fitment with intention to replace at the installation time. When that was done I went to re attach the wire. The unit is glued together and removing the screws will not get you inside. I cut the lenses free with a rotary tool to access the inside. Once in I could clearly see the issue. The wires are lightly soldered to a circuit board and the one that was loose didn’t get connected correctly. I also noted that the wires are not secured in any way to prevent them from being pulled free. Tho the unit seems sealed it is not moisture can get in where the wires come out. With that said and gaining the knowledge I now have I gave it 3 stars. If you read this and are handy I would not hesitate to get one. I did get a replacement one ordered. I took it out of the box, all 3 wires attached. I tested it and it worked. I then mixed up some jb weld epoxy, pushed an inch of the wire back into the housing and epoxied them in. Tested after it cured lit right up and you can’t pull the wire out.
G. S (verified owner) –
Get heavy duty double sided tape – Light works pretty good. I set it up as an extra brake light not a running light. It isn’t super bright but it is an extra, not my main light. Don’t use that double sided tape it comes with, just get the most heavy duty double sided tape you can get and it will hold fine. Has for me for the past month or so.
G. J (verified owner) –
Skip – Very cheap, but you get what you pay for. Not bright. Very flimsy plastic. Skip this one my man.
B. I (verified owner) –
Not to bad!! – Brake light was packaged very well, as I was reading some of the reviews a lot said that there were wires that were pulled from inside of light. I did not have this problem also, there was no need to J-B Weld or epoxy hold the wires hat were coming out as a stopper was in the package as well that went inside of the hole to keep water from going inside light. Very good light for the value! The only Con that I can see is that when you apply brakes the light does not get much brighter than it already is as a running light. All-in-all it was deff worth the money!!
A. S (verified owner) –
For my sportster 1200 CC 2000 – It fit on the bike just as an FYI you guys should add a little tape or something on the cables , since this bikes vibrates a lot and the weather etc etc .. Its just like a heads-up but It was easy to Install and looks amazing on the bike
T. M (verified owner) –
Fair if you modify a bit. – When I got it it was for a project bike. I figured for the price if I needed to modify it and it didn’t work out no big deal. Arrived on time, packaged well. One of the 3 wires was pulled from the inside. I decided to move forward with the mod anyway. I used it for fitment with intention to replace at the installation time. When that was done I went to re attach the wire. The unit is glued together and removing the screws will not get you inside. I cut the lenses free with a rotary tool to access the inside. Once in I could clearly see the issue. The wires are lightly soldered to a circuit board and the one that was loose didn’t get connected correctly. I also noted that the wires are not secured in any way to prevent them from being pulled free. Tho the unit seems sealed it is not moisture can get in where the wires come out. With that said and gaining the knowledge I now have I gave it 3 stars. If you read this and are handy I would not hesitate to get one. I did get a replacement one ordered. I took it out of the box, all 3 wires attached. I tested it and it worked. I then mixed up some jb weld epoxy, pushed an inch of the wire back into the housing and epoxied them in. Tested after it cured lit right up and you can’t pull the wire out.
N. M (verified owner) –
Easy to wire – Plenty bright enough. Looks good. However wont fit underneath sportster rear fender without modification. Like 1 inch to long.
T. I (verified owner) –
Not enough clearance for some – Was really solid for like one week lol but if you live in California some of these freeways will make that light be gone in less than a week. The clearance just isn’t enough for my stock for Harley 48 the tire ate that light quick