Description
Garmin AMPS Rugged Mount with Audio and – Features & Prices in Saudi Arabia :
Garmin AMPS Rugged Mount with Audio and Power for Montana 600 Series (010-11654-01)
Product Dimensions
3.94 x 2.76 x 2.76 inches
Item Weight
6.3 ounces
ASIN
B0055BJBMC
Item model number
010-11654-01
Is Discontinued By Manufacturer
No
Special Features
Lightweight
Other display features
Wireless
Colour
Black
Included Components
AMPS Rugged Mount with Audio/Power Cable
Manufacturer
Garmin
Country of Origin
USA
Date First Available
June 1, 2011
Test video – Garmin AMPS Rugged Mount with Audio and :
Product highlights :
Questions & Answers – Garmin AMPS Rugged Mount with Audio and :
Technical specifications – Garmin AMPS Rugged Mount with Audio and :
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
K. H (verified owner) –
pretty annoying when you have to hit “STAY ON” every … – After just one (very long) trip it started acting up: intermittent “External power lost” message on GPS, pretty annoying when you have to hit “STAY ON” every few minutes, got to the point that I would leave it unplugged. Battery can last a while but back light is essential when trying to navigate at speed.
O. H (verified owner) –
For dashboard mount I used the Ram Mount ball joint base (2) and the Ram Mount double socket arm. – I went through 3 windshield suction type holders for my Garmin Montana 610 to use in my Ranger and broke all 3. My neighbor had this mount for his on his enduro and told me how much he liked it so I ordered one. I’ve been out wheeling 4 trips now and this mount is rock steady. I wired it to the ignition side so it powers up soon as I turn the key. I’ll never sweat remembering to charge my GPS again. When you turn the ignition off the 610 will ask to power off or stay on. Very nice set up.
K. H (verified owner) –
pretty annoying when you have to hit “STAY ON” every … – After just one (very long) trip it started acting up: intermittent “External power lost” message on GPS, pretty annoying when you have to hit “STAY ON” every few minutes, got to the point that I would leave it unplugged. Battery can last a while but back light is essential when trying to navigate at speed.
K. J (verified owner) –
Nice! – I bought this to mount my Garmin Montana 600 on my motorcycles. Of course, shortly after mounting this on motorcycle number 2, the GPS unit started to fail. In researching a replacement Montana 600, I found it was $400 while the new Montana 700i was only $700 and I sold my in reach to cover the difference. But, the Montana 700i uses a slightly different cradle, so I had to get the new cradles for it.
H. J (verified owner) –
Great Mount for ADV and Dual Sport Riding! – I’ve been a DeLorme GPS user for 6 years now, using both PN-40 and PN-60w with SPOT, and though I prefer their functionality and software over Garmin, I am tired of waiting for DeLorme to change their form-factor to something more useful for my needs.
L. H (verified owner) –
After one good weekend in the woods – After one good weekend in the woods, this mount is still holding up well. Even after a couple of low speed falls, my Garmin Montana 650T never skipped a beat.
H. J (verified owner) –
Great Mount for ADV and Dual Sport Riding! – I’ve been a DeLorme GPS user for 6 years now, using both PN-40 and PN-60w with SPOT, and though I prefer their functionality and software over Garmin, I am tired of waiting for DeLorme to change their form-factor to something more useful for my needs.
L. H (verified owner) –
NOT COMPATIBLE WITH MONTANA 700 SERIES – The advertisement should list the Montana model compatible with this mount
H. F (verified owner) –
Only Wish I had bought this sooner – This thing plus the Garmin Montana GPS unit may be the best investment I’ve made in a long time. Take care to install the power leads into an extra switched power (there is usually one behind the headlight and one under the seat on most motorcycles). When I turn the key on my bike (DR650) the unit turns on and when I turn the key off, the unit prompts me to power down or run off of battery power. The mount is very stable, I coupled it with a ram mount. Only wish I had pulled the trigger sooner. The instructions are not super helpful, I was nervous about plugging directly into 12v, but after some research I saw that others had done the same. It works like a champ and with some clean cable routing, this is a set it and forget it set up!
L. H (verified owner) –
NOT COMPATIBLE WITH MONTANA 700 SERIES – The advertisement should list the Montana model compatible with this mount
K. S (verified owner) –
I love the idea of the security torx locking device – I bought this mount to go with a small ram system for my snowmobile mounted Garmin Montana. I love the idea of the security torx locking device, although I haven’t had to use that feature. The best part, is that I don’t have to have any cord coming from the GPS itself to the sled, just snap The GPS out and put it in your pocket. The only potential down side is that RAM is apparently no longer making the small square ball mounting plate with the AMPS hole configuration. I was still able to get it on amazon through GPS city,. but wonder how long they’ll be available. Paying attention RAM people??
K. J (verified owner) –
Nice! – I bought this to mount my Garmin Montana 600 on my motorcycles. Of course, shortly after mounting this on motorcycle number 2, the GPS unit started to fail. In researching a replacement Montana 600, I found it was $400 while the new Montana 700i was only $700 and I sold my in reach to cover the difference. But, the Montana 700i uses a slightly different cradle, so I had to get the new cradles for it.
H. F (verified owner) –
Only Wish I had bought this sooner – This thing plus the Garmin Montana GPS unit may be the best investment I’ve made in a long time. Take care to install the power leads into an extra switched power (there is usually one behind the headlight and one under the seat on most motorcycles). When I turn the key on my bike (DR650) the unit turns on and when I turn the key off, the unit prompts me to power down or run off of battery power. The mount is very stable, I coupled it with a ram mount. Only wish I had pulled the trigger sooner. The instructions are not super helpful, I was nervous about plugging directly into 12v, but after some research I saw that others had done the same. It works like a champ and with some clean cable routing, this is a set it and forget it set up!
K. S (verified owner) –
I love the idea of the security torx locking device – I bought this mount to go with a small ram system for my snowmobile mounted Garmin Montana. I love the idea of the security torx locking device, although I haven’t had to use that feature. The best part, is that I don’t have to have any cord coming from the GPS itself to the sled, just snap The GPS out and put it in your pocket. The only potential down side is that RAM is apparently no longer making the small square ball mounting plate with the AMPS hole configuration. I was still able to get it on amazon through GPS city,. but wonder how long they’ll be available. Paying attention RAM people??
L. H (verified owner) –
After one good weekend in the woods – After one good weekend in the woods, this mount is still holding up well. Even after a couple of low speed falls, my Garmin Montana 650T never skipped a beat.
O. H (verified owner) –
For dashboard mount I used the Ram Mount ball joint base (2) and the Ram Mount double socket arm. – I went through 3 windshield suction type holders for my Garmin Montana 610 to use in my Ranger and broke all 3. My neighbor had this mount for his on his enduro and told me how much he liked it so I ordered one. I’ve been out wheeling 4 trips now and this mount is rock steady. I wired it to the ignition side so it powers up soon as I turn the key. I’ll never sweat remembering to charge my GPS again. When you turn the ignition off the 610 will ask to power off or stay on. Very nice set up.