Description
BESTOOL Motorcycle Crankcase Splitter | Case Splitter – Features & Prices in Saudi Arabia :
BESTOOL Motorcycle Crankcase Splitter | Case Splitter Disassemble & Install 2/4 Stroke Engine Crankcases | Crankshaft puller Comes with 360 Degree Rotational Arms, C-Clip Adaptor, 15-Piece
Manufacturer
BESTOOL PROFESSIONAL GARAGE TOOLS & EQUIPMENT
Brand
BESTOOL PROFESSIONAL GARAGE TOOLS & EQUIPMENT
Item Weight
4.07 pounds
Package Dimensions
14.48 x 8.35 x 4.17 inches
Manufacturer Part Number
QZLBQ001P
Test video – BESTOOL Motorcycle Crankcase Splitter | Case Splitter :
Product highlights :
Questions & Answers – BESTOOL Motorcycle Crankcase Splitter | Case Splitter :
Technical specifications – BESTOOL Motorcycle Crankcase Splitter | Case Splitter :
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
K. J (verified owner) –
Was not stout enough to do the job! – I had high hopes for this tool, but it did not perform as I thought it might. I have an old motorcycle motor that was seized and rusted. Using lots of heat from my welding torch and this tool I thought I could separate the cases. The 6mm rods that screw into the the side cover mounting holes distorted badly when a lot of pressure was applied. I switched to 6mm bolts with heads and lots of heat, then the arms starting to bend, so I gave up. Might work for a motor not rusty, but it did not work for a stuck motor!
K. J (verified owner) –
Was not stout enough to do the job! – I had high hopes for this tool, but it did not perform as I thought it might. I have an old motorcycle motor that was seized and rusted. Using lots of heat from my welding torch and this tool I thought I could separate the cases. The 6mm rods that screw into the the side cover mounting holes distorted badly when a lot of pressure was applied. I switched to 6mm bolts with heads and lots of heat, then the arms starting to bend, so I gave up. Might work for a motor not rusty, but it did not work for a stuck motor!
D. G (verified owner) –
exceptional for the price. – worked on my 96 ysf200 yamaha blaster
M. H (verified owner) –
Weak – Splitting the cases on my dirt bike engine.
S. K (verified owner) –
Sturdy,good finish,strong – A great all-around case splitter for all your motorcycle needs recommended I like the Finish looks good splits cases with ease comes with everything you need okay price point compared to the other ones it would be considered a cheaper one but I think the quality is up there with the typical name brand guys out there
R. I (verified owner) –
Works great – Worked great! Happy to have this in my tool bag!
S. K (verified owner) –
Sturdy,good finish,strong – A great all-around case splitter for all your motorcycle needs recommended I like the Finish looks good splits cases with ease comes with everything you need okay price point compared to the other ones it would be considered a cheaper one but I think the quality is up there with the typical name brand guys out there
R. E (verified owner) –
Perfect for Taking off stubborn Crankcases – very nice, well made, easy to use. storing this is a bit on the rough side as not all three Spindles dont slide together to store, but over all it works as it should
R. I (verified owner) –
Works great – Worked great! Happy to have this in my tool bag!
M. H (verified owner) –
Weak – Splitting the cases on my dirt bike engine.
L. I (verified owner) –
Don’t need it – You don’t need this. I replaced my zx6r 2017 shift forks. Removed the clutch pressure plate by going in a circle loosening the threads oneturn at a time
D. G (verified owner) –
exceptional for the price. – worked on my 96 ysf200 yamaha blaster
R. E (verified owner) –
Perfect for Taking off stubborn Crankcases – very nice, well made, easy to use. storing this is a bit on the rough side as not all three Spindles dont slide together to store, but over all it works as it should
S. J (verified owner) –
Excellent tool – I have used this tool to split and assemble several single-cylinder engines, from Ducatis to old Yamahas. It works perfectly every time. The Assembly tool cuts job time in half. Be patient and diligent and the tool will perform as designed.
S. J (verified owner) –
Excellent tool – I have used this tool to split and assemble several single-cylinder engines, from Ducatis to old Yamahas. It works perfectly every time. The Assembly tool cuts job time in half. Be patient and diligent and the tool will perform as designed.
L. I (verified owner) –
Don’t need it – You don’t need this. I replaced my zx6r 2017 shift forks. Removed the clutch pressure plate by going in a circle loosening the threads oneturn at a time