Description
2pcs Amber CNC Motorcycle Bullet LED Turn – Features & Prices in Saudi Arabia :
2pcs Amber CNC Motorcycle Bullet LED Turn Signal Light Blinker Indicator Front Rear Tail Light Compatible with Honda HarleyYamaha Suzuki Kawasaki
Manufacturer
Rich Choices
Brand
Rich Choices
Item Weight
4 ounces
Package Dimensions
7.87 x 4.92 x 2.44 inches
Is Discontinued By Manufacturer
No
Manufacturer Part Number
D-YUECAQP75
Position
Front
Bulb Type
LED, Incandescent
Special Features
防水
Voltage
12 Volts
Test video – 2pcs Amber CNC Motorcycle Bullet LED Turn :
Product highlights :
Questions & Answers – 2pcs Amber CNC Motorcycle Bullet LED Turn :
Technical specifications – 2pcs Amber CNC Motorcycle Bullet LED Turn :
Brand
Rich Choices
Color
Amber Light
Specific Uses For Product
转向灯，行车灯
Light Source Type
LED, Incandescent
Vehicle Service Type
Dirt bike, Street bike
Special Feature
防水
Voltage
12 Volts
Position
Front
Lens Color
Amber
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
S. D (verified owner) –
Watch out for water. – Gotta be honest, these look really good. The install was simple, but some preps had to be done. For instance, the nuts had to be well threaded in and out a few times so they would not cross-thread while mounting. However, watch out for water! the cap that you see over the orange lens is not water proof. I had to remove the caps, remove the lenses and let them air out! Some o-ring or Teflon might do the trick to prevent water from entering the casing.
K. M (verified owner) –
Dosnt work right – There is no installation instructions, had to figure out the wiring myself. Dosnt work as running light, only blinker. Blinker is very VERY dim. Overall not a good product, would not recommend. Installed on an 05 honda shadow spirit 750
N. E (verified owner) –
There black – Their great
M. T (verified owner) –
Two wire installation!!!! – I used these for my rear indicators on my Yamaha Virago which uses a two wire system for the rear tail lights, these indicators come with a three wire system however you can use them on a two wire system. I’m about to save you some time, use the red and black wires on these taillights for a two wire system, it should be fairly easy to figure out which goes where on your end when you connect them but since the lights come with no directions on how to install these with a two wire system I figured i’d help the next guy out. you can use the yellow wire instead of the red but its a much dimmer setting that way, otherwise the lights are great. They are way smaller than I had anticipated but are well made and they come with interchangeable color discs for the light cover that you can use to change the lights from red, black, and amber. for 20$ you really can’t go wrong with these.
L. O (verified owner) –
Not bad – Cheap lights not bad for money
N. E (verified owner) –
There black – Their great
L. O (verified owner) –
Not bad – Cheap lights not bad for money
B. O (verified owner) –
One was bent but i fixed it..not bad product for the money – Not bad for the money one was bent but i fixed it
B. O (verified owner) –
One was bent but i fixed it..not bad product for the money – Not bad for the money one was bent but i fixed it
K. N (verified owner) –
Good looking turn signals but running light does not work – Bought these inexpensive lights specifically to use for rear turn signals. Also replaced the Light relay with one specifically for LED light use. The turn signals work just fine, but the running light feature does not work. Do not want to take the time to remove the lights or wiring when the turn signals actually work for our application.
D. O (verified owner) –
You may need a diode to make work properly. – Nice looks, good brightness.
D. O (verified owner) –
You may need a diode to make work properly. – Nice looks, good brightness.
K. N (verified owner) –
Good looking turn signals but running light does not work – Bought these inexpensive lights specifically to use for rear turn signals. Also replaced the Light relay with one specifically for LED light use. The turn signals work just fine, but the running light feature does not work. Do not want to take the time to remove the lights or wiring when the turn signals actually work for our application.
K. M (verified owner) –
Dosnt work right – There is no installation instructions, had to figure out the wiring myself. Dosnt work as running light, only blinker. Blinker is very VERY dim. Overall not a good product, would not recommend. Installed on an 05 honda shadow spirit 750
M. T (verified owner) –
Two wire installation!!!! – I used these for my rear indicators on my Yamaha Virago which uses a two wire system for the rear tail lights, these indicators come with a three wire system however you can use them on a two wire system. I’m about to save you some time, use the red and black wires on these taillights for a two wire system, it should be fairly easy to figure out which goes where on your end when you connect them but since the lights come with no directions on how to install these with a two wire system I figured i’d help the next guy out. you can use the yellow wire instead of the red but its a much dimmer setting that way, otherwise the lights are great. They are way smaller than I had anticipated but are well made and they come with interchangeable color discs for the light cover that you can use to change the lights from red, black, and amber. for 20$ you really can’t go wrong with these.
S. D (verified owner) –
Watch out for water. – Gotta be honest, these look really good. The install was simple, but some preps had to be done. For instance, the nuts had to be well threaded in and out a few times so they would not cross-thread while mounting. However, watch out for water! the cap that you see over the orange lens is not water proof. I had to remove the caps, remove the lenses and let them air out! Some o-ring or Teflon might do the trick to prevent water from entering the casing.